2019 Southwestern Industries TRAK 2op CNC Vertical Machining Center

Overall Machine Dimensions
Machine W x D x H (with head all the way up): 30.5″ x 52″ x 101″
Min. height to fit through doorway: 92″

ProtoTRAK System Hardware
ProtoTRAK TMX CNC
Three-axis CNC and DRO
5.7" active-matrix color LCD screen
2 USB ports
LED status lights built into display
512 MB USB Drive (optional)
Uncluttered front panel with few hard keys
Beacon light
Override of program spindle speed
Coolant pump
Networking

Software Features - General Operation
Clear, uncluttered screen display
Prompted data inputs
English language – no codes
Soft keys - change within context
Windows® operating system
Three-axis CNC
Inch/mm selectable
Rigid Tapping
Reference to ball lock locations on table
Absolute home location
Canned cycles – pockets, profiles,bolt hole patterns, etc.
Indexer compatible

Table Dimensions
Table size - 18″ x 15″
Number of tee slots and pitch - 4 @ 63 mm
Tee slot width - 0.630″ or 16 mm
Max table load - 500 lbs.
Ball Lock ® hold down force - 2250 lbs. @ 35 in/lbs. of torque
Machine Net/Shipping lbs. - 2825/3175

Travel
X, Y, Z Travels - 14″ x 12″ x 17″
Max distance from spindle nose table surface - 20.25″
Min distance from spindle nose table surface - 2.75″
Max swing clearance from spindle center to column - 14″
Max Rapid speed X, Y & Z-axis, inches per minute – 600

Spindle
Horsepower – 3HP
Tool holder type – BT30
Spindle nose diameter - 2.2″ or 56 mm
Standard: Max RPM – 6,000

Automatic Tool Changer
ATC Tool Capacity – 8
Max tool Diameter – 2″
Retention Knob – BT30

Air Requirements
Air Pressure: 90 psi
Quality: Air dried/filtered water separator upstream of the machine
CFM: 2.5 at 90 psi
SCFM: 18