1997 BRIDGEPORT ROMI EZ PATH II SD
ConditionUsed
1 available
$12,900.00 USD
1997 BRIDGEPORT ROMI EZ PATH II SD CNC Lathe. Machine is in very good condition and has minimal use on the machine.
• Swing Over Bed: 16.5"
• Swing Over Cross Slide: 8.6"
• Distance Between Centers: 40"
• Spindle Bore: 2.56”
• Spindle Nose: A2-5
• Spindle Speeds: Programmable with multi-range gearbox (up to 3,500 – 4,000 RPM depending on exact configuration)
• Spindle Motor: 10 HP (8 / 4.6 HP ratings across ranges)
• Cross-Slide (X) Travel: 8.6" to 8.7"
• Longitudinal (Z) Travel: 40"
• Tailstock Taper: #4 Morse Taper (MT4)
• Tailstock Quill Travel: 6.3"
• Control: Bridgeport EZ-Path PC-based conversational CNC control (frequently paired with BMCD card architecture)
• Power Requirements: 220V or 460V / 3-phase / 60 Hz (approx. 14 KVA)
• Approximate Weight: 4,000 lbs
Tailstock
10" Chuck
Tool Post
1997 BRIDGEPORT ROMI EZ PATH II SD CNC Lathe. Machine is in very good condition and has minimal use on the machine.
Imperial
| Swing | 16.5" |
| Centers | 40" |
| Spindle Bore | 2.56" |
| Power | 10 hp |
| RPM | 4,000 RPM |
| Swing Over Cross Slide | 9" |
| Control | CNC |
• Swing Over Bed: 16.5"
• Swing Over Cross Slide: 8.6"
• Distance Between Centers: 40"
• Spindle Bore: 2.56”
• Spindle Nose: A2-5
• Spindle Speeds: Programmable with multi-range gearbox (up to 3,500 – 4,000 RPM depending on exact configuration)
• Spindle Motor: 10 HP (8 / 4.6 HP ratings across ranges)
• Cross-Slide (X) Travel: 8.6" to 8.7"
• Longitudinal (Z) Travel: 40"
• Tailstock Taper: #4 Morse Taper (MT4)
• Tailstock Quill Travel: 6.3"
• Control: Bridgeport EZ-Path PC-based conversational CNC control (frequently paired with BMCD card architecture)
• Power Requirements: 220V or 460V / 3-phase / 60 Hz (approx. 14 KVA)
• Approximate Weight: 4,000 lbs
Tailstock
10" Chuck
Tool Post
We use cookies to improve your experience. Privacy Policy.