2025 ULTIMAKER Factor 4 3D Printer
ConditionUsed
1 available
$19,900.00 USD
2025 Ultimaker Factor 4 3D printer, used and ready for your next project. This is an industrial grad FDM 3D printer in "like new" condition.
Specification Details
Printing technology Fused deposition modeling (FDM)
Build capacity, X × Y × Z 13 × 9.4 × 11.8 in. (330 × 240 × 300 mm)
Extrusion system Dual direct-drive extruders; automatic nozzle lifting; interchangeable print cores
Filament diameter 2.85 mm
Dimensional accuracy ±0.2 mm ±0.2% of nominal feature length, subject to manufacturer conditions
Maximum nozzle temperature 340°C / 644°F with HT print core; lower limits with other cores
Maximum bed temperature 120°C / 248°F
Heated chamber Actively controlled up to 70°C / 158°F
Build plate PEI-coated flexible plate
Material storage Six spool bays; maximum 1 kg spool per bay
Material humidity control Average relative humidity below 15%
Air filtration HEPA H13
Operator interface 7-inch touchscreen
Monitoring Built-in 1080p HDR camera
Connectivity Wi-Fi, Gigabit Ethernet, USB 2.0
Software UltiMaker Cura and Digital Factory
Electrical requirement 100–240 VAC, 50–60 Hz, maximum 6 A
Overall dimensions 27.4 × 23.8 × 50.7 in. (695 × 605 × 1,287 mm)
Machine weight 265 lb. (120 kg)
Shipping dimensions 29.9 × 31.5 × 62.5 in. (760 × 800 × 1,587 mm)
Shipping weight Approximately 302 lb. (137 kg)
Official Ultimaker two drawer base cabinet
Print Cores
Extra Material as Pictured in Quote
2) AA 0.4 Print Cores
AA 0.8 Print Core
Filament Selection Variety of 2.85 MM Filament Spools
Build Plate
All Standard Accessories
53 days Total Runtime
• Actively Temperature-Controlled Build Chamber: Heated chamber reaching up to 70 °C and a heated build plate reaching up to 120 °C, ensuring optimal layer adhesion and minimal warping with high-temperature engineering polymers.
• Integrated Automatic Material Handling: Built-in moisture-controlled material station maintains relative humidity under 15%, automatically feeding and auto-switching between up to 6 loaded spools for uninterrupted multi-material printing.
• Direct-Drive Dual Extrusion: High-torque direct-drive dual extruders allow seamless printing of primary engineering materials alongside dedicated breakaway or soluble support structures.
• On-Board Process Reporting & Quality Assurance: Automatic pre-print bed leveling, active flow compensation, and integrated sensor suites generate print job validation reports after every build to guarantee dimensional accuracy and structural integrity.
• Software Integration: Native, seamless integration with UltiMaker Cura slicer profiles and the UltiMaker Digital Factory platform for cloud monitoring, queue management, and secure firmware updates.
2025 Ultimaker Factor 4 3D printer, used and ready for your next project. This is an industrial grad FDM 3D printer in "like new" condition.
Imperial
| Material | 'Plastic' |
Specification Details
Printing technology Fused deposition modeling (FDM)
Build capacity, X × Y × Z 13 × 9.4 × 11.8 in. (330 × 240 × 300 mm)
Extrusion system Dual direct-drive extruders; automatic nozzle lifting; interchangeable print cores
Filament diameter 2.85 mm
Dimensional accuracy ±0.2 mm ±0.2% of nominal feature length, subject to manufacturer conditions
Maximum nozzle temperature 340°C / 644°F with HT print core; lower limits with other cores
Maximum bed temperature 120°C / 248°F
Heated chamber Actively controlled up to 70°C / 158°F
Build plate PEI-coated flexible plate
Material storage Six spool bays; maximum 1 kg spool per bay
Material humidity control Average relative humidity below 15%
Air filtration HEPA H13
Operator interface 7-inch touchscreen
Monitoring Built-in 1080p HDR camera
Connectivity Wi-Fi, Gigabit Ethernet, USB 2.0
Software UltiMaker Cura and Digital Factory
Electrical requirement 100–240 VAC, 50–60 Hz, maximum 6 A
Overall dimensions 27.4 × 23.8 × 50.7 in. (695 × 605 × 1,287 mm)
Machine weight 265 lb. (120 kg)
Shipping dimensions 29.9 × 31.5 × 62.5 in. (760 × 800 × 1,587 mm)
Shipping weight Approximately 302 lb. (137 kg)
Official Ultimaker two drawer base cabinet
Print Cores
Extra Material as Pictured in Quote
2) AA 0.4 Print Cores
AA 0.8 Print Core
Filament Selection Variety of 2.85 MM Filament Spools
Build Plate
All Standard Accessories
53 days Total Runtime
• Actively Temperature-Controlled Build Chamber: Heated chamber reaching up to 70 °C and a heated build plate reaching up to 120 °C, ensuring optimal layer adhesion and minimal warping with high-temperature engineering polymers.
• Integrated Automatic Material Handling: Built-in moisture-controlled material station maintains relative humidity under 15%, automatically feeding and auto-switching between up to 6 loaded spools for uninterrupted multi-material printing.
• Direct-Drive Dual Extrusion: High-torque direct-drive dual extruders allow seamless printing of primary engineering materials alongside dedicated breakaway or soluble support structures.
• On-Board Process Reporting & Quality Assurance: Automatic pre-print bed leveling, active flow compensation, and integrated sensor suites generate print job validation reports after every build to guarantee dimensional accuracy and structural integrity.
• Software Integration: Native, seamless integration with UltiMaker Cura slicer profiles and the UltiMaker Digital Factory platform for cloud monitoring, queue management, and secure firmware updates.
We use cookies to improve your experience. Privacy Policy.