2011 HAAS VM-3 CNC Vertical Machining Center W/ Probing
ConditionUsed
1 available
$54,900.00 USD
2011 HAAS VM-3 CNC Vertical Machining Center. The Haas VM series of verticals is one of the most sought after machines in the used Haas market. The footprint remains the same as a Haas VF-3 but you get 26" of "Z" instead of 20". Very good condition and immediately available.
2011 Haas VM-3 — CNC Vertical Mold-Making Machining Center
Specification Details
X-axis travel 40″
Y-axis travel 26″
Z-axis travel 25″
Table size 54″ × 25″
Maximum table load 4,000 lb, evenly distributed
Spindle nose to table 4″–29″
Maximum spindle speed 12,000 RPM
Spindle motor 30 HP maximum rating
Spindle taper CAT 40; BT 40 configurations available
Spindle drive Inline direct drive
Tool changer 24+1 side-mount
Rapid traverse, X/Y/Z 710 IPM
Maximum cutting feedrate 500 IPM
Maximum tool diameter 3″ with adjacent pockets occupied; 5″ with adjacent pockets empty
Maximum tool length 13″ from gauge line
Maximum tool weight 12 lb
Tool-to-tool change time Approximately 2.8 seconds
Coolant capacity 55 gallons
Air requirement 4 SCFM at 100 PSI
Probing
Programmable Coolant
4th Axis Prewire
24 Position Sidemount Toolchanger
2011 HAAS VM-3 CNC Vertical Machining Center. The Haas VM series of verticals is one of the most sought after machines in the used Haas market. The footprint remains the same as a Haas VF-3 but you get 26" of "Z" instead of 20". Very good condition and immediately available.
Imperial
| X | 40" |
| Y | 26" |
| Z | 25" |
| Power | 30 hp |
| RPM | 12,000 RPM |
| # ATC | 24 |
| Taper | CT 40 |
| Table-W | 25" |
| Table-L | 54" |
| # Axis | 3 |
| Control | CNC (Haas) |
2011 Haas VM-3 — CNC Vertical Mold-Making Machining Center
Specification Details
X-axis travel 40″
Y-axis travel 26″
Z-axis travel 25″
Table size 54″ × 25″
Maximum table load 4,000 lb, evenly distributed
Spindle nose to table 4″–29″
Maximum spindle speed 12,000 RPM
Spindle motor 30 HP maximum rating
Spindle taper CAT 40; BT 40 configurations available
Spindle drive Inline direct drive
Tool changer 24+1 side-mount
Rapid traverse, X/Y/Z 710 IPM
Maximum cutting feedrate 500 IPM
Maximum tool diameter 3″ with adjacent pockets occupied; 5″ with adjacent pockets empty
Maximum tool length 13″ from gauge line
Maximum tool weight 12 lb
Tool-to-tool change time Approximately 2.8 seconds
Coolant capacity 55 gallons
Air requirement 4 SCFM at 100 PSI
Probing
Programmable Coolant
4th Axis Prewire
24 Position Sidemount Toolchanger
We use cookies to improve your experience. Privacy Policy.