CAMPRO CPV-1050B 4+1 16" Trunnion

Capacity
X axis travel: 42”
Y axis travel: 20.9”
Z axis travel: 30.7”
Allowable table load: 2200 pounds
Table T Slots - width x slot spacing: .708" x 3.937" - (5)
Trunnion Table
Table Diameter: 15.75"
Maximum Workpiece Diameter: 26.7"
Maximum Workpiece Height: 12.0"
Maximum Workpiece Weight: 220 pounds
Spindle
Spindle nose to table top: 3.9" - 34.6"
Spindle Bearing Diameter: 2.8"
Column to spindle center: 23.2"
Spindle taper: CAT 40 Big Plus
Spindle speed: 12,000 RPM
A.C. spindle motor (30 min.): 20 HP
Spindle torque (30 min): 132 FT-LBS.
Spindle Driving Method: Belt Drive
Automatic Tool Changer
ATC Type: Twin Arm Type
Number of Tools: 24
Tool Shank: CAT 40
Max. Tool Dia.: 3.1” (80 MM)
Max tool Diameter (No Adjacent Tool): 5.9” (150 MM)
Max. Tool Length: 9.8” (250 MM)
Max. Tool Weight: 15.4 lbs. (7 KG
Tool Selection: Random Bi-Directional
Motion
X and Y axis rapid traverse rate: 1,181 IPM (30 M/MIN)
Z axis rapid traverse rate: 1,181 IPM (30 M/MIN)
Cutting feed rate: 393 IPM (10 M/MIN)
Slide Type: Box Ways
Least command increment: .001mm,
Positioning accuracy: +/- .00020" (full stroke)
Repeatability: +/- .00008"
General
Floor Space Required (W x D): 125" x 96"
Height: 120"
Machine Weight: 13,700 lbs.
Standard Power Source Requirement - Fanuc: 205-235 Volts / 3 Phase/60HZ
Power Capacity: 53 Amps Minimum
Air Source Requirement: 85 – 115 PSI

Standard Features
Fanuc Oi-F PLUS Control (Package 1)
AI APC Contour Control
12,000 RPM Spindle (Belt Drive)
Powerful 20 hp (30 min) high torque spindle motor
High Column (20.9” + 9.8”)
Cartridge Spindle Design
CAT40 Big Plus Spindle
290 PSI CTS
Spindle Air Blow
Rigid tapping
Custom Macro B (User Definable)
Twin Arm 24 Tool ATC
Portable Manual pulse generator
Massive One-piece Meehanite cast iron bed
Chip Auger
Low friction Turcite mating way surfaces
Double Anchored, Pre-tensioned Ballscrews
Fast 1,181 IPM Rapid Traverse rate
Full enclosure splash guard
Flood coolant with large coolant tank
Work light
Operator call lamp (red, yellow, green)
Spindle load meter
Assembly and operation tools
Auto Power Off
Heat exchanger for Electrical Cabinet
Instruction manual, parts list, and electrical diagram
Fanuc operator and maintenance manuals
WARRANTY-MACHINE: One-Year
WARRANTY-CONTROL: Two-Years