Like new GANESH GMV4 Knee Mill

TABLE –

Table Size: 12” X 54” (305mm X 1372mm)
Table Travel / (With Power Feed) 36” (914mm) / 32” (812mm)
Table Capacity 1200 lbs.
T-slot width (3 Ground T-Slots) 5/8” with ground reference edges (15.9mm wide)

MACHINE TRAVELS & CAPACITY –

Table Travel – X axis / (With Power Feed) 33.8” (860mm) / 32” (812mm)
Cross Travel – Y axis 16” (400mm)
Knee Travel – Z axis 16” (406mm)
Ram Travel 17.7” (450mm)

Spindle Nose-to-Table Travel 2” – 18” (50 - 457mm)
Quill Travel – Manual & Power Feed 5” (127mm)
Quill feeds – With Trip Release 0.0015”, 0.003”, 0.006” (0.038mm, 0.076mm, 0.152mm)
Quill Diameter 4.13” (105mm)
Leadscrews with ground pitch (X & Y) 200” per rev. (5mm)

SLIDE WAYS - Hardened & Ground Meehanite Cast Iron
Longitudinal Table – Z Axis Hardened & ground dovetail ways
Cross Slide to Knee – Y Axis Hardened & ground square box ways
Knee to Column – Z Axis Hardened & ground square box ways

SPINDLE HEAD –

Head tilt (Left-to-Right) 90 – 0 – 90 degrees
Head tilt (Front-to-Back / Up-Down) 45 – 0 – 45 degrees
Head Swivel 360-degrees
Spindle Motor 5-HP, 3-Phase 220 vac
Spindle Taper #40 NMTB N.S. spindle taper
Spindle Runout 0.0002” maximum runout (0.005mm)
Spindle Bearings ABEC-7 matched set of Class-7 bearings
Variable Speed Drive - Dual Range 80 - 520 rpm (low-range) / 520 - 4000 rpm (high-range)

Note: 5,000-RPM Electronic Variable-Speed Spindle available with the optional AC Inverter Spindle Head

DIMENSIONS & WEIGHT –

Power Requirements - 3-Phase 220 vac @ 22-amps
Coolant Capacity 11-Gallons (41 liters)
Machine weight 3520 lbs. (1,600 kg)