DEMO Ganesh GT-2040 CNC Toolroom Lathe with FANUC Control

Capacities-
Swing over Bed Ø 20.78” (510mm)
wing over Cross Slide Ø 11.02” (280mm)
Center Height 10.04” (255mm)
Center Distance 39.37” (1000mm)
Bed Length 82.5” (2095mm)
Bed way width 14-1/2” (370mm)
Bed casting depth 13-3/8” (340mm)

Spindle-
Spindle Motor Horsepower – Inverter Type 10-HP (15 HP Peak) (7.5Kw)
Spindle speeds 40 – 2,000 RPM infinitely variable, in 2-gear ranges
Spindle speed gear ranges 1= (40 – 800), 2= (100 – 2000) RPM
• Constant Power Ranges 200-640 & 500-2000 RPM
• Constant Torque Ranges 40-200 & 80-500 RPM
Spindle Bore 3-3/8” (3.385”) (86mm)
Spindle Nose - Camlock D1-8 Camlock
Spindle ID taper in spindle nose Ø92mm x 1/20 Taper

Cross Slide - X-AXIS
Rapid Traverse Feedrate 393 IPM (10m/min)
X-Axis motor power FANUC 2-HP
Cross slide travel 10.63” (270mm)
Cross slide dimensions - width x length 8.26” x 27.5” (210 x 700mm)
Cross slide ballscrew diameter 1” (25mm)
Cross slide ballscrew pitch 5mm Accuracy Grade C3 (H-P Laser Tested)
Cross slide thrust 2860 ft. lbs. (1300Kg Force)

Carriage - Z-AXIS
Rapid Traverse Feedrate 472 IPM (12m/min)
Z-Axis motor power FANUC 2-HP
Z-axis travel 38.58” (980mm)
Cutting tool height maximum 1.5” (38mm)
Carriage ballscrew diameter 1-5/16” (36mm)
Carriage ball screw pitch 10mm Accuracy Grade C3 (H-P Laser Tested)
Carriage slide thrust 6,200 ft. lbs. (2850Kg Force)

Tailstock- Engraved with inch / metric quill graduations
Quill diameter 2-15/16” (75mm)
Quill stroke – with 2-Speed Quill Advance 6-5/16” (160mm)
2-Speed Quill Advance provides a 1:1 and 1:5 handle “Force Multiplier” gear ratio providing 5X thrust force
Quill taper MT-5 Morse Taper # 5
Quill tang drive and drift-slot for tailstock included
Tailstock body set-over adjustment ± 3/8” (± 10mm)

Specifications-
Coolant Pump Motor ¼ HP
Coolant tank capacity 30-gallons (115 liters)
Electrical Requirements 220vac ±5% 60-Hz, 50-amp service
Machine Weight 6172 lbs. (2800 kgs)
Machine Dimensions (L x W x H) 120”x55”x73”