2016 Haas VF-5XT Vertical Machining Center

• XYZ travels 60" x 26" x 25" (1524 x 660 mm x 635 mm)
• Heavy-Duty Sheetmetal Enclosure • Tool Load Monitoring
• Rigid Tapping • Vector Dual Drive (Y-Delta)
• 20-Position Automatic Tool Changer • Automatic Lubrication System
• Rugged Cast-Iron Construction • CT 40-Taper Spindle
• Spindle Speed 7500 rpm • 5 Spare M-Functions
• Brushless Motors • Coolant Washdown Kit
• Flood Coolant System • Spindle Air Blast
• Tool Release Button
• USB port

Other Features Include:
• Free-flow enclosure design • Direct-coupled servo motors
• Triangulated wide-stance castings • Easy-access, roll-out coolant tank
• Water-cooled spindle head • High-capacity cartridge spindle

STANDARD MACHINE SPECIFICATIONS

MACHINE
Machine Height (max) 118.2" (3002 mm)
Machine Width (max) 148.0" (3760 mm)
Machine Depth 114.0" (2895 mm)
Door Opening Width 54" (1372 mm)
Machine Weight 15,150 lb (6872 kg)
Air Required 4 scfm at 100 psi (113 L/min at 6.9 bar)
Power Required 14 kVA
Volts/Phase 200–250 VAC, 3-phase, 50-60 Hz
Full Steel Enclosure 14 GA cold-rolled steel

TABLE
Width 23" (584 mm)
Length 62" (1575 mm)
Maximum Weight on Table 4000 lb (1814 kg)
T-slot Width 0.625" (15.875 mm)
Center Distance 3.15" (80 mm)

TRAVELS
Maximum X axis 60" (1524)
Maximum Y axis 26" (660 mm)
Maximum Z axis 25" (635 mm)
Spindle nose to table 7"– 32" (178 – 813 mm)

SPINDLE
Taper Size #40 Taper
Spindle Speed 0 to 7500 rpm (10K and 15K optional)
Max Power Rating 20 hp (15 kW)
Max Torque 75 ft-lb (102 Nm) @ 1400 rpm
Spindle Bearings ABEC Class 7
Spindle Orientation Electronic

AVERAGE TOOL CHANGE TIMES
Tool-to-Tool 4.2 seconds
Chip-to-Chip 4.5 seconds

FEEDRATES
Rapids on X, Y, Z Axes 710 (18 m/min) X = 540 ipm (13.7m/min)
Maximum Cutting Rate 500 ipm (12.7 m/min)

AXIS MOTORS
X, Y Max Thrust Rating 3400 lb (15,124 N)
Z Max Thrust Rating 5600 lb (24,910 N)