2018 Takamaz XYT-51 CNC Turning Center W/ "Y" Axis Live Tooling, Twin Spindle, Dual Turrets, and an Iemca Barfeeder
Have one to sell?
$289,000.00 USD
ConditionUsed
1 available
2018 Takamaz XYT-51 CNC Turning Center W/ "Y" Live Tooling, Twin Spindle, Dual Turrets and an Iemca Barfeed. Machine is in excellent condition with very low run time. Customer bought machine for a job...ran prototype parts....then didn't get the job. Head 1 has 2397 hours and head 2 has 1100 hours.
5,000 RPM; 18.5kw/30min; A2-6 Spindle Nose; 51mm Bar
Capacity (Main - Fixed)
5,000 RPM; 9kw/30min; A2-5 Spindle Nose; (Sub Spindle, 42MM
Hollow)
Iemca Barfeeder
FANUC 32-iB Controller
12 Station Independent Live Tool Turret (Main- X/Y/Z Axis)
(1/2 INDEX Turret) (BMT 45) Upper
12 Station Independent Live Tool Turret (Main- X/Z Axis) (1/2
INDEX Turret) (BMT 45) Lower
Hydraulic Chucking Cylinder
Chuck Clamp/Unclamp Sensor Confirmation
C-Axis Indexing
Air Blow Device, Front (Main and Sub Spindle)
Splashguard door with safety interlock
Signal tower light 3 colors (red, yellow, & green)
BASE MACHINE SPECIFICATION
Machine light (Internal)
Coolant system (405 lit.)
Preset Counter
Bar Feeder Interface
Pneumatic Part Ejector Unit (Sub-Spindle)
Unloader Unit
Out Parts Conveyor
Chip Conveyor (Right Side - Belt Type)
4) FACE Milling ER-20 Live Tool Unit
4) Cross Milling ER-20 Live Tool Unit
Spindle AIR PURGE
Tool Pre-Setter (Removable) MARPOSS (MIDA-ARM)
Spindle Orientation
OFFSET FACE Milling Live Tool Unit
OD Tool Holders 3/4"
Boring Tool Holders 3/4"
Cut Off Tool Holder
Tool Pre-Setter (Removable) MARPOSS (MIDA-ARM)
10) Round Hole Bushings
KITAGAWA B-206 3 Jaw Chuck
Spindle Orientation
Fanuc Options:
Direct Draw Dimension Programming
Inch/Metric Conversion
Run Hour and Parts Count
M Code Group Function
Simple Tool Life Management
Helical Interpolation
We use cookies to improve your experience. Privacy Policy.