2017 GANESH VFM-10039 Express

***Specs BELOW ARE from a 2019 quote and may differ from this 2017 specs****

GENMILL - 10039 TECHNICAL SPECIFICATIONS

AXIS TRAVEL
X-Travel 98.425” 2,500mm

Y-Travel 39.37” 1000mm

Z-Travel 35.43” (39.37” opt.) 900mm (1000mm opt.)

Spindle Nose to Table Surface 9.8”– 45.27” 250 – 1150mm

Spindle Center to Z-axis covers 41.53” 1055mm (throat dimension)

TABLE
Table Size (LxW) 98.42” x 39.37” 2,500mm X 1000mm

T-slots - 5 total 22mm slot width on 1260mm centers

Max. Table Load 7,700 lbs 3500 kgs load

SPINDLE
Spindle Motor – S1/S2=22/26 kW 50-Horsepower Peak 35-HP 30-minute duty-rating

Spindle Speed – Direct-Drive 6,000 rpm / 12,000 rpm 15,000 – 20,000 rpm optional

Tool Type CAT #50 Taper

Spindle Taper Material / Hardness SCM415 / HRC58-62

Retention System / Holding Capability Bellville Spring Stack 1650-1760 lbs

Spindle Runout 0.000040 T.I.R.

Spindle Bearing Front 110mm NSK 70BNR 10 x 2, P4 class-7 bearings

Spindle Bearing Rear 110mm NSK 70BNR 10 x 2, P4 class-7 bearings

AXIS FEEDS
Accuracy X, Y, & Z axis (JIS6338) ± 0.0002” / 12” ± 0.005mm over 300mm travel

Repeatability X, Y, & Z axis (JIS6338) ± 0.0001” / 12” ± 0.003mm over 300mm travel

Least Input Command Increment 0.0001” / 0.000040” 0.001mm / (40-millionths in metric)

Rapid Traverse – X, Y 472 ipm 12m / minute

Rapid Traverse - Z 393 ipm 10m / minute

Cutting Feedrate 0.02 - 393 ipm 10m / minute

Axis Drive Motor Power – X, Y 10-Hp 7kw

Axis Drive Motor Power - Z 10-Hp 7kw w/brake

Ballscrews – X, Y, Z 63mm ballscrews 10mm pitch

****TOOL CHANGER (Specifications Change with *****50-Taper Option)

Tool Capacity 40+1 40 -Tool Twin-Arm Chain-Drive (520 Needs to verify, machine is 50 taper)

Tool Shank CAT#50 Taper (BT#40 & 50 optional)

Tool Change Time 4.3-second tool-to-tool

Maximum Tool Diameter / w/adjacent tool 5.90” / 3.15” 150mm / 80mm

Maximum Tool Length 11.81” 300mm

Maximum Tool Weight 15 lbs. 7kg

Tool Selection / Tool Access Random access / Bi-directional

SPECIFICATIONS
Air Service Requirements 85 psi @ 14-cfm

Coolant Capacity 172 gallons 650 liters

Connected load electrical requirement 36kva, 100-amps 220vac ±5%, 60-Hz

Floor space requirements recommended 237” x 146” x 142” 600x370x360cm (add 52” for conveyor)

Shipping dimensions (L x W x H) 248” x 154” x 150” 630x390x380cm

Machine Weight 66,138 pounds 30,000 kg