1998 Daewoo Puma 350B CNC Turning Center With Programmable Tailstock

CAPACITY:
Swing over bed 27.5"
Swing over carriage 18.9”
Distance between centers - Puma 350B 44.1”
Puma 350LB 85.4”
Maximum turning diameter 21.7"
Maximum turning length, Puma 350B 41.4"
Puma 350LB 82.7”

SPINDLE:
Spindle speed 20 - 2,000 RPM
Spindle nose ASA-A2-11
Draw tube I.D. 4.62"
Spindle bore diameter 5.20"
Standard chuck size 15”
A.C. Spindle Motor (30 min.), Fanuc 35 HP
Mitsubishi 40 HP
Spindle speed ranges 2
Maximum spindle torque, Fanuc 1,327 ft-lbs
Mitsubishi 1,531 ft-lbs

BED, SADDLE, & CROSS SLIDE:
X axis travel 14.3”
Z axis travel - Puma 350B 43.5”
- Puma 350LB 84.8”
Angle of slant bed 45 degrees
X / Z axis guideway span 14.2” / 16.5”
Tailstock guideway span 11.8”
X axis rapid traverse rate 630 IPM
Z axis rapid traverse rate 630 IPM
X / Z axis ball screw diameter 1.6” / 2.0”
Maximum X axis feed thrust (Fanuc / Mitsubishi) 5,190 lbs / 5,900 lbs
Maximum Z axis feed thrust (Fanuc / Mitsubishi) 5,540 lbs / 6,800 lbs
X axis repeatability + 0.00008"
Z axis repeatability + 0.00008"

TURRET:
Number of tools 10
Turning tool shank size 1.0"
Boring bar diameter 2.5”
Turret index time (next station) 0.25 sec.
Tool selection Bi-directional
Curvic coupling diameter 12.4"
Turret clamping force 35,200 lbs
Turret index repeatability + .0005 degree

TAILSTOCK:
Tailstock quill diameter 4.7"
Tailstock quill stroke (programmable) 4.7"
Tailstock quill thrust (maximum) 2,400 lbs
Tailstock spindle taper MT #6

COOLANT PUMP:
Coolant pump pressure 70 PSI
Coolant pump rated flow rate (at 70 PSI ) 10 GPM
Coolant pump motor 1.5 HP

TANK CAPACITIES:
Coolant tank - Puma 350MB 45 gal.
- Puma 350LMB 62 gal.
Hydraulic power unit 3 gal.
Way lubrication tank 0.5 gal.

GENERAL:
Floor space (Length X Width), Puma 350B 94” x 153"
- Puma 350LB 94” x 199”
Net weight - Puma 350B 18,480 lbs
- Puma 350LB 23,100 lbs
Voltage required: Fanuc 208 - 220 volt / 3 phase
Mitsubishi 208 - 220 volt / 3 phase
Amperage required, Fanuc 130 amps
Mitsubishi 140 amps