2005 ELUMATEC DG 142/02 CNC Double End Miter Cut-Off Saw
ConditionUsed
1 available
2005 ELUMATEC DG 142/02 CNC Double End Miter Cut-Off Saw. Unit is in very good condition and can be viewed under power as needed.
Specification DG 142
Saw blades Two, 500 mm (19.7 in.) diameter
Minimum cutting length 370 mm (14.6 in.)
Head tilt 90° to 45° inward
Available cutting-length versions 3,000, 4,500, or 6,000 mm (about 10, 15, or 20 ft)
Blade feed Pneumatic
Motor power 4 kW (about 5.4 hp) per motor; 5.5 kW option
Compressed air 7 bar (about 100 psi)
Clamping Vertical pneumatic clamps
AUTOMATIC MOVEMENT OF THE MOBILE HEAD THRU A DC MOTOR CONTROLLED BY A NUMERICAL
CONTROL
PNEUMATIC MANAGEMENT OF ALL ANGLES UP TO 22 DEG. 30' (EXTERNAL)DESIGNED FOR PVC &
ALUMINUM PROFILES
IT CAN HANDLE PROFILES FROM 13-3/4" TO 177", WITH AUTOMATIC POSITIONING OF THE SAW
HEADS THROUGH LINEAR GUIDES
UNIVERSAL PIVOTING & TILTING OF BOTH SAW UNITS
EXTERNAL-DIMENSION CUTS POSSIBLE FOR ALL CUTTING VARIANTS, CONSEQUENTLY NO
COMPLICATED LENGTH CALCULATIONS ARE NECESSARY
PIVOTING RANGE WITH DIGITAL ANGLE DISPLAY
CAPABILITY FOR SERIES PRODUCTION
2005 ELUMATEC DG 142/02 CNC Double End Miter Cut-Off Saw. Unit is in very good condition and can be viewed under power as needed.
Imperial
| Rect-Cap (W) | 118" |
| Rect-Cap (H) | 13.75" |
| Power | 14.8 hp |
| Saw Blade Dia. | 19.688" |
| Control | CNC |
| Dimensions | 232 L x 59 W x 55 H |
| Weight | 3200 lbs |
Specification DG 142
Saw blades Two, 500 mm (19.7 in.) diameter
Minimum cutting length 370 mm (14.6 in.)
Head tilt 90° to 45° inward
Available cutting-length versions 3,000, 4,500, or 6,000 mm (about 10, 15, or 20 ft)
Blade feed Pneumatic
Motor power 4 kW (about 5.4 hp) per motor; 5.5 kW option
Compressed air 7 bar (about 100 psi)
Clamping Vertical pneumatic clamps
AUTOMATIC MOVEMENT OF THE MOBILE HEAD THRU A DC MOTOR CONTROLLED BY A NUMERICAL
CONTROL
PNEUMATIC MANAGEMENT OF ALL ANGLES UP TO 22 DEG. 30' (EXTERNAL)DESIGNED FOR PVC &
ALUMINUM PROFILES
IT CAN HANDLE PROFILES FROM 13-3/4" TO 177", WITH AUTOMATIC POSITIONING OF THE SAW
HEADS THROUGH LINEAR GUIDES
UNIVERSAL PIVOTING & TILTING OF BOTH SAW UNITS
EXTERNAL-DIMENSION CUTS POSSIBLE FOR ALL CUTTING VARIANTS, CONSEQUENTLY NO
COMPLICATED LENGTH CALCULATIONS ARE NECESSARY
PIVOTING RANGE WITH DIGITAL ANGLE DISPLAY
CAPABILITY FOR SERIES PRODUCTION
We use cookies to improve your experience. Privacy Policy.