CAMPRO CPV-1050B 4+1 16" Trunnion Vertical Machining Centers (5-Axis or More) | 520 Machinery Sales LLC
Vertical Machining Centers (5-Axis or More)
CPV-1050B 4+1 16" Trunnion
For Sale

Constructed with high quality meehanite cast iron and heat treated to relieve stress thereby assuring maximum rigidity and accuracy. Box ways on all 3 axes greatly upgrades stability and dampening capability. Automatic lubrication unit with intelligent pressure failure detection function provides reliable supply for saving cost and for environmental protection. Oil-coolant separation design which meets the environment protection requirements allows centralized collection for all way oil.

# Axis5
Power20 hp
RPM12,000 RPM
# ATC24
TaperCAT 40 Big Plus
ControlCNC (Fanuc Oi-F PLUS)

Capacity X axis travel: 42” Y axis travel: 20.9” Z axis travel: 30.7” Allowable table load: 2200 pounds Table T Slots - width x slot spacing: .708" x 3.937" - (5) Trunnion Table Table Diameter: 15.75" Maximum Workpiece Diameter: 26.7" Maximum Workpiece Height: 12.0" Maximum Workpiece Weight: 220 pounds Spindle Spindle nose to table top: 3.9" - 34.6" Spindle Bearing Diameter: 2.8" Column to spindle center: 23.2" Spindle taper: CAT 40 Big Plus Spindle speed: 12,000 RPM A.C. spindle motor (30 min.): 20 HP Spindle torque (30 min): 132 FT-LBS. Spindle Driving Method: Belt Drive Automatic Tool Changer ATC Type: Twin Arm Type Number of Tools: 24 Tool Shank: CAT 40 Max. Tool Dia.: 3.1” (80 MM) Max tool Diameter (No Adjacent Tool): 5.9” (150 MM) Max. Tool Length: 9.8” (250 MM) Max. Tool Weight: 15.4 lbs. (7 KG Tool Selection: Random Bi-Directional Motion X and Y axis rapid traverse rate: 1,181 IPM (30 M/MIN) Z axis rapid traverse rate: 1,181 IPM (30 M/MIN) Cutting feed rate: 393 IPM (10 M/MIN) Slide Type: Box Ways Least command increment: .001mm, Positioning accuracy: +/- .00020" (full stroke) Repeatability: +/- .00008" General Floor Space Required (W x D): 125" x 96" Height: 120" Machine Weight: 13,700 lbs. Standard Power Source Requirement - Fanuc: 205-235 Volts / 3 Phase/60HZ Power Capacity: 53 Amps Minimum Air Source Requirement: 85 – 115 PSI Standard Features Fanuc Oi-F PLUS Control (Package 1) AI APC Contour Control 12,000 RPM Spindle (Belt Drive) Powerful 20 hp (30 min) high torque spindle motor High Column (20.9” + 9.8”) Cartridge Spindle Design CAT40 Big Plus Spindle 290 PSI CTS Spindle Air Blow Rigid tapping Custom Macro B (User Definable) Twin Arm 24 Tool ATC Portable Manual pulse generator Massive One-piece Meehanite cast iron bed Chip Auger Low friction Turcite mating way surfaces Double Anchored, Pre-tensioned Ballscrews Fast 1,181 IPM Rapid Traverse rate Full enclosure splash guard Flood coolant with large coolant tank Work light Operator call lamp (red, yellow, green) Spindle load meter Assembly and operation tools Auto Power Off Heat exchanger for Electrical Cabinet Instruction manual, parts list, and electrical diagram Fanuc operator and maintenance manuals WARRANTY-MACHINE: One-Year WARRANTY-CONTROL: Two-Years

CAMPRO CPV-1050B 4+1 16" Trunnion
Vertical Machining Centers (5-Axis or More)